Electrodes; Electrode Placement - intensity TWIN STIM III Manual De Instrucciones

4.4 Electrode
4.4.1 Electrode options
The electrodes are disposable and should be routinely replaced
when they start to lose their adhesive nature. If you are unsure
of your electrodes adhesive properties, order new replacement
electrodes. Replacement electrodes should be re-ordered
through or on the advice of your physician to ensure proper
quality. Follow application procedures outlined in electrode
packing, to maintain optimal stimulation and to prevent skin
irritation.
4.4.2 Place electrodes on skin
Apply electrodes to the exact site indicated by your physician or
therapist. Be sure the skin surface over which electrodes are
placed is thoroughly cleaned and dried. Make sure the electrodes
are placed firmly to the skin and make good contact between the
skin and the electrodes. Place the electrodes over the skin; attach
them properly, firmly, and evenly.
Caution:
1) Before applying the selfadhesive electrodes, it is
recommended to wash and degrease the skin, and then dry it.
2) Do not turn on the device when the self-adhesive electrodes
are not positioned on the body.
3) Never remove the self-adhesive electrodes from the skin
while the device is still turned on.
4) It is recommended that, at minimum, 1.5" x 1.5" selfadhering
electrodes are used at the treatment area

4.4.3 Electrode placement

The placement of electrodes can be one of the most important
parameters in achieving success with therapy. Of utmost
importance is the willingness of the physician to try the various
styles of electrode placement to find which method best fits the
needs of the individual patient.
All manuals and user guides at all-guides.com
22