Reviewing Images; Deleting Images; Using The On-Screen Menus - MediCapture MediCap USB100 Guia Del Usuario

Reviewing Images

At any time during an imaging session, you can review the images
you have already captured to internal memory. Simply press the
Back and Next buttons on the front panel. This will step you through
the images in internal memory.
After you review all of the images, a menu will be displayed allowing
you to do any of the following: continue reviewing the images,
capture more images, or copy the images from internal memory to
the USB flash drive (for more details, see the section titled "Saving
Images to the USB Flash Drive" on page 13).

Deleting Images

While you are reviewing images (as described in the previous
section), you can delete images from internal memory. To do so,
press the Delete button on the front panel. This will delete the image
currently displayed on the monitor.

Using the On-Screen Menus

The MediCap USB100 displays helpful messages and menus on the
monitor screen.
When a menu is displayed, you can scroll through the menu choices
by using the Back and Next buttons on the front panel. To select a
menu choice, press the Select button.
MediCap™ USB100 User Guide
12 USB100-UG-E-070324-MC
To stop reviewing
images and resume
capturing images,
simply press the
"Capture Images"
button.
The image review
feature only displays
images that are stored
in internal memory. It
does not display images
that are on the USB
flash drive. To display
images that are on the
flash drive, remove it
from the USB100 and
insert it in a computer.