MediCapture MediCap USB100 Guia Del Usuario página 17

MediCap™ USB100 User Guide
ERROR! Images NOT saved to USB
Insert USB memory
and press SAVE TO USB MEMORY button
Description: This message will be displayed if you remove the USB
flash drive before the images in internal memory have been saved.
Action: Insert a MediCapture USB flash drive and press the Save to
USB Memory button again. If the USB flash drive does not have
sufficient memory, you will need to follow the "Action" procedures in
the previous system message (ALERT! USB memory NOT
sufficient).
WRONG USB DEVICE
Description: This message will be displayed if you insert a non-
MediCapture brand USB flash drive in the front panel. Only
MediCapture brand flash drives can be used.
Action: Contact your MediCapture dealer for information on how to
obtain the proper flash drives.
ALERT! Cannot read USB flash drive
Description: This message will be displayed if you insert a USB
flash drive in the front panel and the system is unable to connect
with it. The flash drive may be defective or broken.
Action: Contact your MediCapture dealer for information on how to
obtain a new flash drive.
17 USB100-UG-E-070324-MC