Cubase Le 4; Helix Board Control Panel - Phonic Helix Board 24 Universal Manual Del Usuario

Cubase LE 4

Cubase LE 4 is a fairly powerful program provided along with
the Helix Board 24 Universal mixer that allows users to record,
edit, delete, and alter their tracks. Please note that only 8 tracks
can be recorded at once with the version of Cubase included,
and users must upgrade or find other suitable DAW software if
they choose to record more tracks.
Installation
Insert the Cubase LE 4 installation DVD that came with your
mixer into the DVD drive of your computer. Run the installer.
When first running Cubase, you will be prompted with a request
for an activation code. Users must sign up to Steinberg's
MySteinberg service to receive an activation code.
Setup
After successfully completing the installation process, the
following process must be followed to work efficiently with the
Helix Board 24 Universal mixer.
1. Open the Cubase LE 4 program.
2. Go to the 'Devices' pull-down menu and select 'Device
Setup.' On the left, select 'VST Multitrack.'
3. From the ASIO Driver drop-down list select the "Phonic ASIO
Driver." A pop-up box will ask you if you want to switch the
ASIO driver. Click 'Switch.'
4. Activate the audio tracks received from the Helix Board
mixer by following the following steps.
a. Go to the "devices" pull-down menu and select 'VST
Inputs.' This will display the various inputs ("HB 24 U Ch
1," "HB 24 U Ch 2," etc.)
b. Activate 8 of these channels by clicking the "Active
" button located next to each channel name. Please
note, only 8 input channels can be activated at any one
time. This is a limitation of Cubase LE 4. If more input
channels are needed, we suggest upgrading to a higher
version of Cubase, or using other DAW software.
5. For further instructions on the operation of Cubase, please
consult the user manual by pressing F1 while the program is
open.
If you wish to reset the Helix Board 24 Universal ASIO driver,
simply go to the 'devices' pull-down menu and select 'device
setup'. Simply click "reset" and select the "Phonic ASIO Driver".
Click 'ok' to continue.
14

Helix Board Control Panel

The Helix Board Universal control panel can be accessed at
any time by entering choosing the shortcut from your Programs
menu. This program will not only allow users to alter their
device and channel names and properties, but will also let
them correct for latency issues, change sampling rates, and so
forth. When opening the software, a number of options will be
available for users to select from, allowing them to adjust the
available properties.
Devices
In the Devices section, users are able to view and edit the name
of the Phonic Device connected to their computer.
Input Channels
The Input Channels section allows users to view and edit the
name of the various input channels received from the USB/
FireWire input. For a list of default channel names, please
consult the table on page 13.
Output Channels
By entering the Output Channels section, users can view and
edit the names of the two output channels from the computer to
the Helix Board 24 Universal mixer.
Helix Board 24 Universal