Publicidad
All manuals and user guides at all-guides.com
Setting the watch
Setting the date
Press the pushbutton on the side of the case at 10 o'clock using the corrector push-rod, 1 press equates
to a change of date.
Recommendation of use
Do not set the date of your watch between 6:00PM and 3:00AM. This may cause damages in the movement.
Do not set the date of your watch via the time-setting function; be sure to use exclusively the dedicated
date corrector.
Position 1:
Winding the watch
Your watch is equipped with a manual winding
mechanical movement.
Set your watch's crown to position 1 and wind up
the mechanism until the power reserve indicator
on the dial is fully charged. The power reserve is
approximately 70 hours.
We nonetheless recommend winding your watch
once a day for optimum functioning.
Position 2:
Setting the time
With the crown in position 2, turn the hands
clockwise past 12 o'clock: if the date changes,
it is midnight; if not, it is midday.
Turn the crown clockwise to set the time.
Once the change has been made, push the
winding crown back into position 1.
Publicidad
