Electrical tester
Safety Information
WARNING:
1,TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, DAMAGE TO THE INSTRUMENT OR
PERSONAL INJURY, PLEASE FOLLOW THE
SAFETY INSTRUCTIONS DESCRIBED IN THE
USER MANUAL.
2,TO ENSURE SAFE OPERATION AND LIFE OF
THE METER, DO NOT PLACE THE METER IN
ANY ENVIRONMENT WITH HIGH PRESSURE,
HIGH TEMPERATURE, DUST, EXPLOSIVE GAS
OR VAPOR.
29
01
01
Electrical tester
Safety Symbols
Note-Important safety information,
refer to the instruction manual.
Application around and removal from
UNINSULATED HAZARDOUS LIVE
conductors is permitted.
Caution when testing on live conductors.
Equipment protected throughout by double
insulation or reinforced insulation.
Conforms to UL STD. 61010-1, 61010-2-032,
61010-2-033; Certified to CSA STD C22.2
NO. 61010-1, IEC STD.61010-2-032,
61010-2-033
Complies with European (EU) safety
standards
Earth (ground) TERMINAL
Direct current
Alternating current
CAT III:
Applicable to test and measuring circuits connected to
the distribution part of the building's low-voltage MAINS
installation.Example:fixed equipment switchboards,circuit
breakers,wiring,including cables,bus bars,junction boxes,
switches,sockets,utput terminals on devices for industrial
use and other equipment.
30
02