Safety Information; Safety Symbols - KPS PA20 MINI Manual De Funcionamiento

1.

SAFETY INFORMATION

This meter is designed and manufactured according to the safety requirements
set out by the IEC61010-1 standards for electronic test instruments and the
hand-hold digital multimeters. Its design and manufacture is strictly based on
the provisions in the CAT III 600V of IEC61010-1 and the Stipulation of 2-Pol-
lution Grade.
2.

SAFETY SYMBOLS

Symbol Meaning
Danger. Important information. See manual.
Hazardous voltage.
Application around and removal from Hazardous. Live con-
ductors is permitted.
Double insulated(Protection class II).
Earth ground.
3. WARNING
To avoid possible electric shock, personal injury, or death, read the following
before using the Meter:
• Use the test leads supplied to ensure operation safety. If required, they must
be replaced with test leads of the same model or class.
• Inspect the test leads before use. Do not use them if insulation is damaged
or metal is exposed. Check the test leads for continuity. Replace damaged
test leads before using, Do not use the Meter if it appears damaged.
• Do not touch the metal tips of the test leads when the meter is connected to
the circuit to be measured.
KPS-PA20 MINI • Digital clamp meter
14