Cisco Meraki MS220 Serie Guía De Instalación Rápida página 3

ENGLISH
Installation
Power
Link/Act
LED Indicator
Status
LED Indicator
On Power is on.
Power
Off Power is off.
On Port is connected
Blinking Transmitting / Receiving data
Link/Act
Off Port is not connected
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make sure
that it is properly connected to a power source.
Step2. Plug‐in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch by
using Ethernet cable. (e.g. Cat‐5e)
Power Input
MS220‐24: 100‐240V, 50‐60HZ, 0.5‐0.3A
MS220‐24P: 100‐240V, 50‐60HZ, 5‐2.2A
Operating Temperature
0~40℃
SFP+
Meaning
3