EAS ELECTRIC EFCND Serie Manual De Instrucciones página 21

10.2 The default model of DC fan coil is set as 12Pa when leaving the factory.
Clients can dial to the responding position to choose the model and static pressure according to the nameplate and actual static
pressure requirements of the models and static dial code table .
10.3 Fault and Protection
When the unit is subject to failure, main board corresponding LED will flash.
Fault code table and Protection:
NO.
Fault Name
1
Fan failure
2
Not set models
The A-weighted sound pressure level is below 70dB.
Models and static dial code table :
Static
pres sure
2 1 a P
MODE
020 (N/A)
single-m otor
030
single-m otor
040 (N/A)
single-m otor
050
single-m otor
060
single-m otor
080
double-m otor
100
double-m otor
120
double-m otor
Not
set models
Main board LED light
LED light flash 4 (flashing frequency 2Hz) stop 2s, cycle of action
LED light continue to flashing(flashing frequency 2Hz)
V.2
0 5 a P
0 3 a P
Owner's & Installation manual
9