Operation - Manoeuvring - Carbest CARA-MOVE Manual Del Usuario

Operation - Mover Engagement/Disengagement
Switch on your isolation key to provide power to your control box. Turn on the handset, a solid green
light should indicate that the two are paired, if not, see: Operation - Handset Pairing. For manual
engage movers, see the relevant section in the Installation guide. For Auto-Engage Movers:
Engage:
Press and Hold [FN] (Fig.13.K) and
[ENG] (Fig.13.I) for 1 second.
Disengage:
Press and Hold [FN] (Fig.13.K) and
[DENG] (Fig.13.J) for 1 second.
Cancel engagement/disengagement:
Press [FN] (Fig.13.K).
Note: During disengagement, the mover will retract from the wheel, make contact with the end of its
path of travel, and then proceed to move back toward the wheel for 1 second. This is the prevent long
term contact of metal components and will reduce ceasing.
In the event of an issue, an engagement tool is supplied that can be used to manually engage/
disengage auto-engage mover models. To use this remove the small plastic plug on the rear of the
engagement motor and turn the engagement worm manually using the tool.

Operation - Manoeuvring

Caution! Please read the operation safety guidelines closely BEFORE to attempting to
operate your caravan mover system.
Using Fig.13 and the 'Operation - Handset Functions' section of this manual for reference, familiarise
yourself with the handset button layout.
Turn on the Battery Power Isolation Switch. Activate the handset by double-clicking the power button
(Fig.13.A). The indication LED (Fig.13.B) on the remote control will illuminate. Engage both rollers as
described in the 'Operation - Mover Engagement/Disengagement' section of this manual. Before
operating the Mover, release the handbrake.
Proceed to move the vehicle using the various buttons, ensuring at all times to be aware of your
surroundings and terrain. In single axle mode, buttons [FR] (Fig.13.D) and [RL] (Fig.13.G) or [FL]
(Fig.13.E) and [RR] (Fig.13.F) can be pushed together to use the spin on the spot function. This
feature is disabled in twin axle and AWD modes.
Spin on the spot
options:
or
58
1 sec
1 sec
UK