Bestway LAY-Z-SPA Manual Del Propietário página 10

when not in use, should be kept off the ground to retain its
cleanliness (particularly the surface in close proximity to the
water spa water surface). The cover should be stored in an
appropriate location, where it cannot be damaged, or cause
damage.
• Check the set water temperature and consider lowering it for
the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period of
time (where the spa provides this option, but still maintains
residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth underneath
the spa to minimize heat loss through the bottom of the spa.
• Maintain clean filters to preserve appropriate working conditions
for the pump and avoid unnecessary water replacement and
re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
• Please keep at least 1m clearance around the spa.
• Consult your local government authority for water regulations
related to convenient water supply for filling the spa.
• Recommended to consult experts and/or local authorities to
apply local or national laws/regulations relating to childproof
fencing, safety barriers, lighting, and other safety requirements.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden decking
because of the risk of bleaching the wood. A cover lifter, or
similar device, is useful for ensuring that the cover does not
come into contact with the ground. A cover lifter is strongly
recommended for spas in rental settings.
IMPORTANT: Because of the combined weight of the Lay-Z-Spa,
water, and users, it is extremely important that the base where
10