JVC KD-X350BTS Manual De Instrucciones página 21

Receptor de medios digitales
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BLUETOOTH®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the current
call and held call
Adjust the phone volume *
1
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes *
3
*
1
This adjustment will not affect the volume of the other sources.
*
2
Press and hold
to continuously increase the volume to 15.
*
3
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
2
Repeat step
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
On the faceplate
On the remote control
Press
or the
( Not available )
volume knob.
Press and hold
( Not available )
or the volume knob.
Press and hold
Press and hold
or the volume knob.
Press
.
( Not available )
Turn the volume knob
Press
during a call.
Press
during
( Not available )
a call.
.
MIC GAIN
NR LEVEL
ECHO CANCEL
Make the settings for receiving a call
1
Press
.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
To return to the previous setting item, press
*
2
or
during a call.
SETTINGS
AUTO ANSWER
RING COLOR
RING ILLUMI
BATT/SIGNAL *
* Functionality depends on the type of the phone used.
LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the
microphone increases as the number increased.
LEVEL –05 to LEVEL+05 (LEVEL 00): Adjust the noise reduction
level until the least noise is being heard during a phone conversation.
LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation
delay time until the least echo is being heard during a phone
conversation.
to enter Bluetooth mode.
2
until the desired item is selected or activated.
01 SEC to 30 SEC: The unit answers incoming call automatically in
the selected time (in seconds). ; OFF: Cancels.
KD-X350BTS/KD-X35MBS:
COLOR 01 to COLOR 49 (COLOR 08): Selects the illumination color
for the buttons as notification when there is an incoming call and
during a call. ; OFF: Cancels.
KD-X255BT:
BLINK 01 to BLINK 05 (BLINK 02): Selects the blinking pattern
for the buttons as notification when there is an incoming call. ;
OFF: Cancels.
KD-X350BTS/KD-X35MBS:
AUTO: Shows the strength of the battery and signal when the unit
detects a Bluetooth device and the Bluetooth device is connected. ;
OFF: Cancels.
Default: XX
.
Default: XX
17
ENGLISH

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-x255btKd-x35mbs

Tabla de contenido