Receive A Call - JVC KD-X350BTS Manual De Instrucciones

BLUETOOTH®
Auto Pairing
When you connect the iPhone/iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
– [AUTO PAIRING] is set to [ON]. ( 19)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
16
ENGLISH
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• KD-X350BTS/KD-X35MBS:
The buttons will blink in the color you have selected in [RING COLOR]. ( 17)
KD-X255BT:
The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 17)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)
During a call:
• KD-X350BTS/KD-X35MBS:
The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 17)
KD-X255BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate
First incoming call...
Answer a call Press
Reject a call
Press and hold
knob.
End a call
Press and hold
knob.
On the remote control
or the volume knob. Press
or the volume Press and hold
or the volume Press and hold
.
.
.