Cuisinart CSJ-300 Guía De Referencia Rápida

3
Coloque el
recolector de
jugo, alineando
las columnas fijas
en el recipiente
para jugo.
5
Coloque el
colador de jugo
interno en el
colador de jugo
externo (juntos, esto
se conoce como el
conjunto colador).
7
Coloque la
barrena en el
conjunto colador,
presionando
firmemente hacia
abajo hasta que
quede firmemente en
su puesto.
9
Coloque el
recipiente para
jugo en el centro
delantero de la unidad y
coloque el recolector
de pulpa en el centro
delantero del surtidor
de pulpa.
PG-39291-ESP
4
Inserte el
recolector de
jugo en el punto
fijo de la carcasa.
6
Coloque el
conjunto
colador en el
recolector de
jugo, presionando
firmemente las
orillas del filtro
hasta que quede
firme en su sitio.
8
Coloque la tapa
sobre el
recolector de
jugo. Alinea la flecha
en la tapa con el
símbolo de candado
abierto en el bol. La
tapa debe estar
asentada
uniformemente en el
recolector de jugo.
Gire la tapa en
sentido horario hasta
que se bloquee.
10
Introduzca el
empujador
en la boca de
alimentación,
alineando las
muescas en el
empujador con la
pequeña ranura en el
interior de la boca de
alimentación.
©2020 Cuisinart
QUICK REFERENCE GUIDE
Juice Fusion EasyClean Slow Juicer
MORE JUICE minus the mess.
BEFORE FIRST USE
• Remove all packing materials and any promotional labels or stickers from your Cuisinart
Be sure all parts (listed in Parts and Features) of your new appliance have been included before
discarding any packing materials.
• You may want to keep the box and packing materials for use at a later date.
• Before using your Cuisinart Slow Juicer for the first time, remove any dust from shipping by wiping
®
the base with a damp cloth.
• Thoroughly clean cover, pusher, feed tube with hopper, pulp container, juice container and plastic
juice strainer assembly by hand or on top rack of dishwasher.
• Never place the motor housing in the dishwasher or immerse it in water. Always use a damp cloth to
wipe it clean.
OPERATING INSTRUCTIONS
1. Make sure your Slow Juicer is properly assembled. (See Assembly Instructions, below.)
2. Plug the power cord into a 120V electrical outlet.
3. Wash all selected fruits and vegetables.
4. Place fruits and vegetables into the feed tube with use of the pusher. Larger items can be added to
the feed tube by lifting the hopper cap and placing directly on the plate hopper to juice.
5. While many fruits and vegetables will not need cutting, any item with a diameter larger than 2¾
inches will need to be cut.
6. Press ON when ready to begin.
REVERSE: Use this when needing to clear the auger to avoid clogging of the juicing area.
7. The juice will flow into the juice container and the pulp will accumulate in the pulp container.
8. When finished juicing, press the STOP switch to stop the motor.
9. If the machine suddenly shuts down while operating, press the STOP switch first and then press
the REVERSE button. To make the food in the auger come up, release and then press the ON
switch. Repeat 3 times.
a) When the machine is in reverse, gently press the lid to prevent the lid from becoming loose.
b) If the machine is still not working, disassemble it and then wash before trying again.
ASSEMBLY INSTRUCTIONS
1
Place motor base
on a clean, flat
surface. Make
sure the motor base is
unplugged from the
power outlet (not
shown).
IMPORTANT!
Do not discard. Read before operating your Slow Juicer.
Keep for future reference.
These helpful hints are intended to be a supplement to the
Instruction Booklet. In order to ensure proper operation
and optimum performance, please read the entire
Instruction Booklet.
® Slow Juicer.
2
Close the pulp
spout. Cap will
be securely
closed when you hear
a click.