Assembly; Mounting The Base - Greencut SRJ200L Manual De Instrucciones

50

ASSEMBLY

PLACING THE BATTERY
1. Before inserting the battery pack, make sure that the
switch is in the "0-off" position. Inserting the battery pack
into a running tool can be dangerous.
2. Insert the battery into the back of the saw until it clicks
into place.
DUST DEPOSIT
1. Insert the dust extraction nozzle into the dust extraction
opening at the back of the saw and turn it anti-clockwise
to secure it (to remove it, you will need to turn it clockwise).
2. Attach a standard hoover hose and allow the hoover to
suck up the dust while you are sawing. Always wear a dust
mask, even when using the vacuum cleaner.

MOUNTING THE BASE

1. Choose a blade according to the material to be cut.
2. Turn the keyless chuck clockwise, insert the blade fully (with the teeth facing you) and release the keyless
chuck. Insert the blade into the blade holder, making sure that the teeth are facing forward and that the flat
rear edge of the blade fits into the guide roller.
3. Check that the blade is correctly positioned in the guide roller and that it is secure in the blade holder.
2