Philips DSS 370 Instructivo De Manejo página 8

INSTALLATION
1 Windows 3.1 or a computer without USB
Connect the supplied 3.5 mm plug cord to the
LINE IN jack of the right speaker and your
soundcard.
Note: The volume has to be adjusted with
your soundcard.
or
Windows 95 and USB
•
Connect the supplied 3.5 mm plug cord to
the LINE IN jack of the right speaker and
your soundcard.
• Connect the USB cable to a USB port.
• Follow the instructions that come with the
supplied CD ROM to install the USB drivers
on your Windows 95 system. Do not use
the CD ROM when operating a Toshiba
Infinia!
or
Windows 98 and USB
Connect the USB cable to a USB port.
Note: If a soundcard is installed on your
Windows 98 system, follow the
98 setup as described later on.
8
All manuals and user guides at all-guides.com
2 Connect the left speaker to the SPEAKER OUT
jack of the right speaker.
3 Connect the SUBWOOFER OUT jack of the
satellite speakers and the AUDIO IN jack of
the subwoofer with the supplied 2.5 mm to
3.5 mm plug cord.
4 Connect the AC/DC adapter to the POWER IN
jack at the rear of the right speaker.
5 Connect the AC/DC adapter to a wall socket.
The voltage mentioned on the label of the
AC/DC adapter must match the local power
voltage.
6 Connect the power cord of the subwoofer to a
wall socket. The voltage mentioned on the
label of the subwoofer must match the local
power voltage.
Windows