All manuals and user guides at all-guides.com
Put the filter holder back into its initial position and make sure it is
•
locked properly.
Never forget to close the lid of the water tank before switching
•
on your coffee maker.
Put the glass jug with closed lid on the base of the appliance.
•
Switch on the coffee maker. The pilot light of the switch will be
•
illuminated, indicating that your appliance is operating. Thanks to
the keep warm function, your coffee is warmed up as long as the
appliance is switched on. Note that the appliance will be
switched on as long as you do not switch it off manually.
However, we advise you not to let the appliance switched on
more than 2 hours and make sure that you never let an empty jug
on the appliance.
When you remove the jug from the appliance, a non-drip valve
•
will automatically operate to stop any drops of coffee dripping
onto the hotplate. Replacement of the carafe automatically
opens the non-drip valve and allows remaining coffee to filter
trough into the jug.
When the water tank is empty, wait a few additional minutes
•
before removing the jug.
DESCALING AND CLEANING
Descaling the coffee maker prolongs its life span. For descaling
•
your coffee maker only use products especially made for this
purpose and read their instructions.
To simplify cleaning, you can remove the swing filter holder. To do
•
so, open it completely, and pull it upwards. To put it back,
proceed inversely.
Clean the jug and the filter holder in soapy water and rinse them
•
with clear water.
For the other parts of the appliance such as the hot plate, use a
•
soft damp cloth.
Never use a dishwasher to clean any part of your coffee maker
•
PRACTICAL HINTS
When you notice that the coffee making process is longer than it
should be it is probably time to decalcify the appliance. Do not wait
5
UST CM 1 - 060206