Panasonic AK-HRP250G Manual De Usuario página 23

11 [M.GAIN/M.PED] (LOAD) button
12
[SHUTTER] (ROP INF) button
13
[10 -19] indicator
14
Camera control number dis-
play
15 [SELECT/EXIT] button
16 [CHARA/MENU] button
17
[SELECT] dial
Use this button to switch the operation target to the master gain or master pedestal and dis-
play the value on the adjustment value display.
Press the [SHIFT] button and then press the [M.GAIN/M.PED] (LOAD) button (lights amber) to
display the LOAD menu for loading the settings of the unit from a memory card.
Use this button to switch the operation target to the shutter and display the value on the adjust-
ment value display.
Press the [SHIFT] button and then press the [SHUTTER] (ROP INF) button (lights amber) to dis-
play the ROP INF menu for configuring the settings of the unit.
This indicator is lit when you select a 2-digit camera control number (10 to 19) during camera
control number selection.
This display shows the camera control number (number controlled for connecting to the cam-
era by the unit). The indication flashes during camera control number selection.
When a 2-digit camera control number (10 to 19) is selected, only the last digit is displayed.
When you press and hold this button, a camera control number becomes selectable (camera
control number display flashes).
Short press this button when the indication on adjustment value display is the iris value (when
the [ND/CC] (SAVE) button, [M.GAIN/M.PED] (LOAD) button, and [SHUTTER] (ROP INF) but-
ton are OFF) to switch the always displayed value to the camera number.
Press this button during SAVE/LOAD/ROP INF menu operation to return the indication of the
adjustment value display to the previous indication or exit the menu.
Use this button to switch on and off the character display of the status screen on the CCU pic-
ture monitor (PM).
Switch the item to display with the [SELECT] dial.
Press and hold this button to switch on and off the camera menu or CCU menu display.
When a button is in the following state: Changes the setting value on the adjustment value dis-
play.
One of the [ND/CC] (SAVE), [M.GAIN/M.PED] (LOAD), and [SHUTTER] (ROP INF) buttons
is on.
The [CHARA/MENU] button is off.
When a button is in the following state: Operates the SAVE/LOAD/ROP INF menu.
The [SHIFT] button is on.
One of the [ND/CC] (SAVE), [M.GAIN/M.PED] (LOAD), and [SHUTTER] (ROP INF) buttons
is on.
The [CHARA/MENU] button is off.
When the [SELECT/EXIT] button is on: Selects the camera control number.
When the [CHARA/MENU] button is on: Switches the character display and selects the camera
menu or CCU menu.
- 23 -
Parts and their functions