MOB MO9265 Guia De Inicio Rapido página 2

MO9265
EN
Power Bank
Charging electronic digital equipment:
Please use the original chargigng cable supplied by the electronic device manufacturer. The power bank will
automatically charge up your electronic digital products once they are connected to each other.
(Please make sure the power bank is charged for best performance.)
Unplug the charging cable after the device is fully charged.
Caution
:
The output power of the power bank is 5V/1A , please check input specification of your product before charging with
the power bank.
Check battery capacity in power bank:
Press the button to check if the power bank needs to be recharge. The Blue LED lights
indicate battery capacity remaining in the power bank as follows – 4 lights = 100%; 3
lights = 75%; 2 lights = 50%; 1 light = 25%
Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB cable in to the power bank to recharge. The blue
indicator light will flash when charging in progress. The indicator lights turns into full light when the power bank is
fully charged.
Specification:
Input: DC5V/1A
Output: 5V/1A
Capacity: 4000mAh
Power efficiency: 70%
Charging time: 4-5 hours approximately
Cycle life: 500 times

When connecting the power bank to the device, please use cables and connectors provided
from the authorized maker. The use of cables or connectors from unauthorized maker may cause
severe or fatal injuries and property loss and damage to the product and the device.

Power Bank is compatible with Apple® Product USB Cable/ adapter (Not Included).

If the product does not start charging when it connects to the device, please try to disconnect all cable and
try again.

Battery explode if disposed in fire

Dry location use only

Shock hazard – Do not open

A battery should NOT be exposed to water