Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not immerse or wet the cord, plug, or motor base in water or other liquids.
•
Do not leave the power cord hanging within reach of children.
•
Do not leave the power cord close to or in contact with the hot parts of the
appliance, near a source of heat or a sharp angle or inside the blender jug in
contact with the blades.
•
Keep moving parts (blades) away from the cord during use.
•
Never pull the power cord to disconnect the appliance.
•
If any part of the appliance has been wet, ensure that the device is
disconnected from the power source and dry with a lint free cloth.
•
In case of malfunction, switch off and disconnect immediately and request a
professional to confirm suitability of operation.
•
Do not attempt to operate the device if this has not been professionally
confirmed suitable for operation.
•
Do not attach an external switching device (such as a timer) or connect the
blender to a circuit that can regularly switch the blender on and off.
•
Once used, the device should be disconnected and stored in a safe place
•
Do not operate appliance with a damaged cord or plug, or after appliance
malfunctions, or if dropped or damaged in any way. Immediately cease use of
the appliance and request examination from a professional. Similarly operate
only if the damage has been repaired and qualified by the appropriate
professional.
•
Use only the blender jug and lid that is supplied with this blender. The use of
additional attachments, not specified by this manual may cause the risk of
fire, electrical shock, or injury.
•
Always ensure the blender is assembled properly before using. Lid must be
firmly secured for the jug before operation to ensure internal contents do not
come out, spray or overflow.
•
Never remove the lid or the blender jug before the appliance has come to a
complete stop.
•
Always ensure the appliance is properly assembled as according to the
included instructions before use. Using the appliance without being properly
assembled may cause product malfunction, product damage or pose safety
risk including personal injury.
•
If the motor is straining under a heavy load, do not operate continuously for
more than 2 minutes.
•
Allow the motor to rest for 2 minutes between uses on heavy loads.
•
Do not leave the blender unattended when in use.
•
When in operation avoid any contact with blades or moving parts.
•
Keep hands, fingers, hair, and clothing away from the table blender during use
•
Always turn blender off and unplug at the wall before reaching inside.
•
Attention when handling the blender jug as the blades are very sharp. Be
careful when emptying the jug and during cleaning. Mishandling of the blades
may cause injury.
•
Do not remove the jug from the motor base while blender is in use.
•
Do not operate without any ingredients in the blender jug.
•
Never attempt to operate with damaged blades, or with utensils, or any foreign
objects inside the blender jug.
•
To reduce the risk of severe injury to persons or damage to the blender, keep
hands and utensils out of the jug while blending.
•
Never use the blender jug without ingredients or with solid ingredients only.
•
Always pour the liquid ingredients into the blender jug first, before adding the
solid ingredients.
•
Be careful if hot liquid is poured into the blender, as it can be expelled out of
the jug due to sudden steaming.
- 3 -
Publicidad
Tabla de contenido
