LEGRAND 4 306 93 Instrucciones De Montaje página 5

This camera housing is constructed from die-cast aluminium alloy with lacquer coating. It is equipped with an adjustable mounting
bracket.
An IEEE 802.3 at-compliant PoE+ power unit is supplied.
This product is IP66 and IK08.
Operating temperature: -30°C to +70°C
CONNECTION DIAGRAM:
Caution:
- An F/UTP Category 6 cable is recommended.
- The length of the Cat6 cable should not exceed 90 metres from the injector. Beyond this length, data transmission and power supply is
not guaranteed.
HOUSING
Inner space for camera mount W100 x H90 x L275 mm
Dimensions
Adjust position and direction
160 mm
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
Cable
CAT5
Cat6 cable
PoE injector
PoE injector
OUT IN
Dimensions of bracket base
425 mm
5
230 VAC
230 VAC
Cable
Cat6
SWITCH
SWITCH
110 mm
83 mm
95 mm
69 mm
8 mm
165 mm
en