Care And Cleaning - Rampage Cowl Light Mount Instrucciones De Instalación

6
Adjust light mount and tighten all hardware.
See Figure 6
7
Install and adjust light in slot.
The slot allows for a wide range of light positions
and configurations.
Multiple lights can be mounted or a Light can be
mounted on top, then loosened and slid down
to allow the windshield to fold down without
complete removal of the light.
See Figure 7
8
Repeat steps 1 - 7 on Passenger/Right side.

Care and Cleaning

Rampage products are built to last; any automotive detergent you use to wash your vehicle is sufficient to
clean the Cowl Light Mount. Do not use any harsh abrasive detergents.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every
effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
800-328-2409 • Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 3 of 3
Figure 6
Figure 7