Smartx App - Abus 770A Manual De Instrucciones

3.3
USB-C
While charging the device, install
the Smart X app (from chapter 4).
Charge the battery to 100% (the
charge level of the battery can be
displayed in the app), and the lock
will be ready for use.
3.4
After charging, remember
to properly close the cap
Attention
again!
The cap seals the device
and protects the electronics
from humidity and dirt.
– 24 –
4. Smart X App
- Download the ABUS Smart X app, install it and follow the
instructions in the app until you have scanned the QR code
on the ABUS code card provided.
- It is imperative to keep the code card in a safe place even
after completing the setup. You need the code card for soft-
ware updates, if you lose your smartphone, and for proof of
ownership for matters related to warranty claims and repair.
Do not give the card to third parties.
- Bluetooth must be switched on in your smartphone to
®
operate the lock electronics. The smartphone must be
connected to a network and not be in flight mode.
SmartX
– 25 –