Opening the lock
5.2
1. Smartphone with functioning SmartX app in range
(approx. 2-5 m)
2. Actuate (and hold) the slide switch
3. Lock automatically unlocks, confirmed by tone sequence
4. Remove the shackle (within 10 seconds)
If, while in transport mode, there is no authorised smartphone
in the vicinity or the Bluetooth
the slide switch is activated, the lock remains closed.
In monitoring mode, this event would trigger the alarm when
movement occurs.
function is deactivated when
®
– 28 –
Closing the lock
5.3
1. Insert the shackle into the lock body
2. Lock automatically closes, confirmed by tone sequence
3. Transport mode is activated after 5 seconds, confirmed through a
signal tone (deep tones)
4. In order to activate monitoring mode, the slide switch must be
actuated (and held) within 5 seconds of inserting the shackle,
confirmed with a signal tone (high tones)
Alarm triggering
5.4
If lock movement is detected in monitoring mode and the
authorised smartphone is not in range, a pre-alarm will
sound.
If strong movement is still detected afterwards, the main
alarm will trigger (15-second duration). The process
repeats if movement continues.
5 Sec.
– 29 –
5x