Hardware Installation - Stardom SOHOTANK ST2 Manual Del Usuario

4. Hardware Installation

Please follow the instructions below to complete the hardware installation:
Step 1 Open the package and take out the product making sure that all the enclosed
contents are not damaged or missing. Should you find damages or missing
contents, please contact your supplier immediately.
Step 2 Place the system on a stable surface. Ensure that it is well ventilated without
blockage to the vent and kept away from areas near water and damage prone
areas.
Step 3 Use the key included in the accessory kit and inserted into the key access opening
to eject the removable drive tray latch and extract the removable drive tray.
Step 4 Mount your hard drives onto the removable drive tray and secure it with the
screws included in the accessory kit to avoid any damage to the hard drive due to
accidental movements.
Step 5 When the hard drive installation has been completed, insert the hard drive tray into
the system horizontally and secure the latch into place.
SOHOTANK ST2 Series User Manual
English
Deutsch
Français
Español
中文
日本語
한국어
5