HP Smart Tank790 Serie Manual Del Usuario página 5

3
Install printheads
You must fill the ink tanks before installing printheads. Install the printheads when prompted on
the printer control panel.
1. Lift the ink access door and wait for the
carriage to move to center and stop.
2. Press the blue button to open the
printhead cover.
3. Remove and discard the orange guard.
Handle carefully to avoid ink stains.
4. Remove the orange cap and
protective tape on both printheads.
Caution: Do not touch the electric contacts
or print nozzles under the tape.
5. Insert the printheads and click
into place.
6. Close the printhead cover and the
ink access door.
1
3
4
5
6
2
5