Brizo BELO 63052LF Manual Del Usuario página 6

All manuals and user guides at all-guides.com
3 A.
Faucet Installation - Center Mount
Remove adhesive backing on trim
A.
ring gasket (1) and press into place
on trim ring (2). Place trim ring on
bottom of spout hub. Insert supply
tubes through mounting hole in sink.
Your faucet is designed for a hole
diameter of 1 3/8" +/- 1/4" (35 mm
+/- 6 mm) and a deck thickness of
up to 3" (76 mm). Maximum deck
thickness of soap dispenser is
3" (76 mm).
77522 Rev. F
2
1
B.
6
B.
3
2
1
6
4
5
Push hose (1) partially up into mounting
shank (2). Install the mounting bracket
(3) and nut (4) onto the mounting shank
using wrench (5). For decks up to 1 3/8"
(35 mm) thick use spacer (6) provided
between nut and mounting bracket.
Note 1: The wrench provided is
designed to be used with a variety of
tools: flat/Phillips head screwdrivers,
wrenches, etc. Note 2: For thin
gauge sinks (not recommended), use
the thin deck aid (7) RP49588 (not
included) as shown for single and
3 hole installations to help support
the deck. HINT: Turn the spout tube
opposite the handle to balance the
assembly when mounting.
7