Kunft KC3904 WH Manual De Instrucciones página 15

Space Requirements
• Keep enough space to open the door.
• Keep at least 50 mm gap from both
sides.
Levelling the unit
To do this you need to adjust the two levelling
feet at the front of the unit.
If the unit is not levelled, the doors and
magnetic seal alignments will not be covered
properly.
Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class specified on the appliance's rating
plate:
Climate class
Sn
n
ST
T
Location
that air can circulate freely around the back of the appliance. To
ensure best performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of
the appliance and the wall unit must be at least 100 mm. Ideally,
however, the appliance should not be positioned below overhanging
wall units. Accurate levelling is ensured by one or more adjustable
feet at the base of the appliance.
Warning! It should be possible to disconnect the appliance from the
mains power supply, and so the plug must be easily accessible after
installation.
Frigo-KC3904-Manual-2.indd 15
refrigerator combi
This appliance should be installed away from sources of heat
such as radiators, boilers, direct sunlight, etc. Please ensure
KC3904 WH
Ambient temperature
+10 °c to +32 °c
+16 °c to +32 °c
+16 °c to +38 °c
+16 °c to +43 °c
15
EN
18/02/02 16:39