Operation Procedures; Blade Guide - Skymsen ML Manual De Instrucciones

3.2 Operation Procedures

3.2.1 Check if the equipment is steady on its workplace.

3.2.2 Blade Guide

With the equipment turned of, turn the handle on the counterclockwise to release the
Blade Guide Blade N° 02 (Pic. 03). Adjust the height of the Blade Guide to the cutting zone
(exposed area of the Blade) so that it has the exact height of the piece being cut.
Press the Handle firmly to regulate the desired height.
PICTURE 03
03
01
02
3.2.3 Door
The Door N°01 Picture 03) must be closed while the equipment is being used.
IMPORTANT
Before starting the machine, check if the door is completely closed and
locked by the zip 03.
8