Bluetooth ® Set Up - LEXIBOOK BTP100 Serie Manual De Instrucciones

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Lexibook® is under license. Other trademarks
and trade names are those of their respective owners.
© 2016 Bluetooth SIG, Inc.
Your audio player must support the A2DP Bluetooth® profile to match this Bluetooth®
speaker. Please refer to your audio player's instruction manual for accurate information
about the Bluetooth® profiles it supports, and how to set up Bluetooth® pairing.
Initial Pairing
1. Once the device is on, first press the power button and then press FUNC button
and select "Bt" mode, a signal tone will sound and the blue indicator of the
Bluetooth® will flash to indicate that Bluetooth® mode is effective.
2. Activate the Bluetooth® function on your personal device and make sure it is in
discoverable mode.
3. Confirm pairing or select the Bluetooth® name "BTP100" to connect your player
to the speaker.
4. If pairing is successful, the Bluetooth® light will stop flashing and glow steadily.
You can play an audio or a video file. Adjust the sound volume level using the
keys on your personal device or the volume buttons of the speaker.
5. To stop the connection with the speaker, press FUNC or power button or a
button on your audio player. Once the connection has been stopped, the LED
indicator will flash.
Note: Some music players do not fully support Bluetooth® audio controls. Play/
pause, previous and next buttons on the Bluetooth® speaker may not respond.
The music player may also turn off. To get the best control experience in the said
player, use the on-screen track controls of your music player rather than those on
the speaker.
Re-pairing
When the Bluetooth® mode of the Bluetooth® speaker or your device has been
switched off:
1. Switch on the Bluetooth® of your audio player and press FUNC button to select
Bluetooth® mode.
2. The speaker automatically finds the last device it was paired with.
Notes :
• The Bluetooth
• Make sure the effective distance between the Bluetooth
speaker is within 10m.
• Interference may occur during playback when using the Bluetooth
near other wireless devices. If playback through Bluetooth
move the Bluetooth
use the 3.5mm AUX IN jack instead of the Bluetooth
BTP100series_IM1246_V10_303.indd 16
BLUETOOTH
®
speaker only connects to one device at a time.
®
speaker and the playback device to a different location, or
®
SET UP
®
function.
16
®
device and the
®
function
®
is problematic,
14/6/16 6:22 pm