ESPAÑOL
be high when the
appliance is in use.
If the connection to
10.
the mains has been
damaged, it must
be replaced, take
the appliance to an
authorised technical
support service. Do not
attempt to disassemble
or repair the appliance
by yourself in order to
avoid a hazard.
This appliance is for
11.
household use only, not
professional, industrial
use.
Unplug the appliance
12.
from the mains before
refilling the water tank.
Ensure that the voltage indicated
–
on the rating label matches the
mains voltage before plugging in
the appliance.
Connect the appliance to a base
–
with an earth socket withstanding
a minimum of 16 amperes.
The appliance's plug must fit into the
–
mains socket properly. Do not alter
the plug. Do not use plug adaptors.
To avoid phenomena in
–
the electrical network, it is
recommended that the device
be connected to a maximum
impedance of 0.27 Ω. For any
questions, consult your electric
company.
Do not use or store the
–
appliance outdoors.
Do not leave the appliance out in
–
the rain or exposed to moisture. If
water gets into the appliance, this
will increase the risk of electric shock.
Do not force the power cord. Never
–
use the power cord to lift up, carry
or unplug the appliance.
Do not wrap the power cord
–
around the appliance.
Do not clip or crease the power cord.
–
Do not allow the power cord to
–
hang or to come into contact with
the hot surfaces of the appliance.
Check the state of the power
–
cord. Damaged or tangled cables
increase the risk of electric shock.
Do not touch the plug with
–
wet hands.
Do not use the appliance if the
–
cable or plug is damaged.
If any of the appliance casings
–
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
Do not touch the heated parts of
–
the appliance, as it may cause
serious burns.
USE AND CARE
Fully extend the appliance's power
–
cable before each use.
Do not use the appliance if the
–
accessories or consumables
attached to it are defective.
Replace them immediately.
EN
ES