Installation Position - Dictator Z 1000 Instrucciones De Instalación

INSTALLATION

Installation position

The door damper Z 1000 is fixed vertically more or less in the centre of the door leaf. The
upper edge of the casing should stand out about 1 mm from the upper edge of the door leaf
(see "Dimensions").
Installation steps
1. Fix the casing to the door leaf with a single screw through the oblong hole and align it.
2. After checking that it's in the correct position, fix it with the other screws.
3. Fix the cylinder to the casing using the bolt.
4. Attach the hook to the door frame so that the rubber roller enters centred. The hook is at
the correct height when the rubber roller on the lever barely touches the front edge of the hook
when closing.
Questions?
We'll be happy to help! Just contact us!
4
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Installation instructions - Door damper Z 1000