Installation Position - Dictator V 1600 Instrucciones De Instalación

INSTALLATION

Installation position

The mounting bracket for the V 1600 is screwed approx. 85 mm below the door frame on the
door, near the closing edge. The distance to the closing edge depends on whether the closed
door just rests against the frame or it enters in a recess.
Installation steps
1. Fold out the base plate and fix it to the bracket.
2. Swivel the housing downwards until it clicks onto the base plate.
3. To install the hook, bend the roller lever of the door damper.
4. Attach the hook to the frame, first through just one of the slotted holes, so that it's in line with
the door damper and the rubber roller barely touches its front edge when closing.
5. After placing the hook in the correct position, fix it attach it through the other holes.
Questions?
We'll be happy to help! Just contact us!
4
Installation instructions - Door damper V 1600 for sliding doors
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de