Protecting The Environment - Black and Decker CS1835 Manual Del Usuario

ENGLISH (Original instructions)
Problem Possible cause
Chainsaw not us- Debris in tank
ing oil
Oil hole in cap blocked
Debris in chain bar
Debris in oil outlet
Maintenance
Regular maintenance ensures a long effective life for the tool.
We recommend you make the following checks on a regular
basis.
Warning! Before performing any maintenance on power tools:
Switch off and disconnect the tool from the mains supply.
u
Oil level
The level in the reservoir should not be allowed to fall below
a quarter full.
Saw chain and guide bar (fig. F)
After every few hours of use and before storage, remove
u
the guide bar (4) and the saw chain (5) and clean them
thoroughly.
Make sure that the guard is clean and free from debris.
u
On reassembling, turn the guide bar (4) through 180° ,
u
remove the chain tensioning wheel with a screwdriver and
re-attatch to the opposite side of the guide bar.
Warning! Do not overtighten.
Oil sprocket nose via the sprocket lubriation hole ($), this
u
ensure an even distribution of wear around the guide bar
rails.
Saw chain sharpening
If you are to get the best possible performance from the tool it
is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener pack-
age. For this purpose we recomment the purchase of teh
BLACK+DECKER saw chain sharpening kit (available from
BLACK+DECKER service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
BLACK+DECKER service agents. Always use genuine spare
parts.
Replacement Bar (????)
Replacement Chain (????)
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
12
All manuals and user guides at all-guides.com
What to do if your chainsaw needs repair.
Possible solution
Your chainsaw is manufactured in accordance with the rel-
evant safety requirements. Repairs should only be carried out
Empty oil from tank and
by a qualified person using original spare parts otherwise this
replace
may result in considerable danger to the user. We recommend
Remove debris from
you keep this user manual in a safe place.
hole
Mains plug replacement (U.K. & Ireland only)
Remove debris and
clean the chain bar
If a new mains plug needs to be fitted:
Remove debris
u
u
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 10 A.

Protecting the environment

Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Separate collection. This product must not be
disposed of with normal household waste.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.