Troubleshooting
Problem
Possible Cause
Unit will not
Battery pack not installed
start.
properly.
Battery pack not charged.
Internal componets too hot.
Attachment or extension pole
not attached to the base unit.
Battery pack
Battery pack not inserted into
will not
charger.
charge.
Charger not plugged in.
Surrounding air temperature
too hot or too cold
Unit shuts off
Battery pack has reached its
abruptly.
maximum thermal limit.
Out of charge. (To maximize
the life of the battery pack it is
designed to shut off abruptly
when the charge is depleted.)
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper care and regular cleaning.
Regularly clean the appliance using a damp cloth. Do not
u
use any abrasive or solvent-based cleaner. Never let any
liquid get inside the appliance and never immerse any part
of the appliance into liquid.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Possible Solution
Check battery pack
installation
Check battery pack
charging requirements.
Allow tool to cool down.
Ensure attachemnt is
properly seated and locked
into position on the
extension pole.
Ensure extension pole is
properly seated and locked
into position on the base
unit.
Insert battery pack into
charger until LED
illuminates.
Plug charger into a working
outlet. Refer to "Important
charging notes" for more
details.
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below
105 degrees F (+40,5°C)
Allow battery pack to cool
down.
Place on charger and allow
to charge.
Black & Decker declares that these products described under
(Original instructions)
Input voltage
V
m/s
No load speed
rpm
Battery (not supplied)
Voltage
V
Capacity
Ah
Type
Charger (not supplied)
Input Voltage
V
Current
A
Approx Charge Time
min
Level of sound pressure according to EN 60745:
Sound pressure (L
) 83 dB(A), uncertainty (K) 3 dB(A)
pA
accoustic power (L
) 94 dB(A), uncertainty (K) 1,9 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
%
(a
) 2,5 m/s
, uncertainty (K) 1,5 m/s
2
h,
BCASCS61B SEASONMASTER
Chainsaw attachment
"technical data" are in compliance with:
2006/42/EC,
EN 60745-1:2009+A11:2010,
EN 60745-2-13:2009+A1:2010,
These products also comply with Directive 2014/30/EU and
2011/65/EU.
2000/14/EC (annex V)
Measured sound power level (LwA) 94 dB(A)
Uncertainty (K) 1,9 dB(A)
Guaranteed sound power (LwA) 96 dB(A)
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
ENGLISH
BCASCS61B - Chainsaw
DC
Chain speed = 3.8
Sprocket = 2000
90617054
DC
Li-Ion
90634971
AC
2
TM
18
18
2
230
1
120
15