Tabla de contenido
Publicidad
Electrical safety
The battery charger can be connected to any power plug, preventing discharge, that
is installed according to norms in force.
The plug must be powered at 230 V 50 Hz.
Disconnect the charger if you will not be using it for a long time, if you are changing the tool or performing
maintenance on the tool.
10. MAINTENANCE AND STORAGE
Maintenance
ATTENTION! Disconnect the charger if you will not be using it for a long time, if you are changing the tool or
performing maintenance on the tool.
Check whether the tool is showing signs of wear.
If the charger is damaged (cover, conductors or connector), immediately arrange their replacement at an
authorised service centre or from the vendor.
Regular care for the tool will ensure not only a long lifetime and performance
Before use, always visually check for worn or damaged parts.
Replace damaged or worn parts. To ensure that the tool always remains balanced, always replace the entire
set of the worn or damaged tools.
Worn or damaged tool parts may only be replaced at an authorised service centre or arranged by the vendor.
Before cleaning disconnect this product from the power source.
To clean the plastic parts of the product, use a soft cloth dipped in lukewarm water.
Do not use aggressive cleaning products and solvents as this could damage the surface of the product.
Do not clean the tool under running water or submerge under water.
After changing the working tool, check that the working tool is secured in its storage position.
After every use of the shears, the blade must be cleaned and lubricated. If the shears are used non-stop for
extended periods of time, lubrication should be performed during work.
Sharpening
Sharpening the grass shear blade (Fig 8).
1. Take the blade out of the shears
2. Rotate the individual blades as in Fig 8
3. Clean grass remains from both the blades
4. The blades can be sharpened using a standard
sharpening stone
5. Return the blades to their original position
CORDLESS GARDEN SHEARS
Operating instructions | Maintenance and storage
15
EN
Fig. 8
USER'S MANUAL
Publicidad
Tabla de contenido
