Aethra D2061 Guía Rápida página 17

All manuals and user guides at all-guides.com
QUICK GUIDE
Parameters configuration, if any.
Start the test.
The display shows the Test Status (running or not) and the ADSL link status.
The LED STATUS is OFF if no test running, is ON (solid green) during
►
regular test running.
The LED LINK is OFF if the physical connection is not active, is ON (solid
►
yellow) during the connection phase, is ON (solid green) when the
connection is active, is ON (solid red) when an error occurs.
The test results displayed are the following:
MODE Line mode
FAST ATM Fast mode bit rate
INTER ATM Interleaved mode bit rate
MAX ATM maximum line rate
CAP. Relative Capacity
MARGN Noise Margin
ATTEN Attenuation
POWER Output Power
ATU-C ID ATU-C manufacturer ID
VER ATU-C compatibility version
Where:
ATM Fast/Interleaved bit rate is the current maximum bit rate available for ATM
:
Fast or Interleaved path. It depends on the DSLAM configuration.
Only one type of path at time is currently available on the ADSL
line, so the other value will be zero.
ATM maximum line rate: is the maximum theoretic ATM bit rate, without
overhead, that may be supported by the line.
D2061 ADSL TESTER
(Kbps)
(Kbps)
(Kbps)
(%)
(dB)
(dB)
(dBm)
ANSI only
ANSI only
17