Noise Test; Through Mode Feature - Aethra D2061 Guía Rápida

All manuals and user guides at all-guides.com
MANUAL DE ISTRUCCIONES
Para empezar una nueva generación de tráfico IP
utilizando la misma conexión a Internet.

3.8. Noise Test

With this test it is possible to verify the quality of the line measuring the noise
present. Perform the test in order to point out possible troubles and cross talks
with frequencies up to 1.1MHz.
Open the TEST MENU.
Select ADSL Access, ATU-R mode.
Select MANUAL TESTS.
Select NOISE TEST.
Start the test.
The tester provides, to each frequency associated to a DMT tone, the RMS noise
value measured in dBm.

3.9. Through Mode feature

Enable this feature whenever it is necessary to use the device D2061 as a real
user's modem. The tester is in Transparent mode, so all data flow will pass
through it. D2061 is connected on one side to the ADSL line and on the other end
to a PC Ethernet 10BaseT port.
Open the TEST MENU.
94
D2061 ADSL TESTER