GE AED05 Serie Manual Del Propietario Y Instrucciones De Instalación página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PREPARE THE AIR CONDITIONER (cont.)
4
Slide the free end of the accordion panel
C
into the side panel rails. Slide the panel
down. Be sure to leave enough space to
slip the top and bottom of the frame into
the rails on the cabinet.
NOTE: There is a right and a left accordion
panel. Be sure to use the proper panel for
each side.
Slide the left and right accordion panels
D
into the top and bottom mounting rails.
Top mounting rail
Top left
Bottom mounting rail
PREPARE THE WINDOW
5
Cut the window sash seal to the proper length .
Peel off the backing and attach the seal to the
underside of the window sash .
Installation Instructions
Top right
10
INSTALL THE AIR CONDITIONER
6
IN THE WINDOW
Place the air conditioner on the sill with
A
the bottom mounting rail against its back
edge . Center it and close the window
securely behind the top mounting rail .
It should be level or slightly tilted to the
outside . Use a level; about a 1/3 bubble
will be the correct case slant to the outside .
or
Type B screws
Extend the left and right accordion panels
B
to the vertical window sashes and attach,
through the holes in the panels, with 5 Type
B screws, as appropriate .
INSTALL SUPPORT BRACKET AND
7
FOAM TOP WINDOW GASKET
CAUTION:
A
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window
side jamb with one Type B
screw .
Cut the foam top window gasket to the window
B
width .
Stuff the foam
C
between the glass
and the window
to prevent air and
insects from getting
into the room .
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal .
or
Vinyl
Wood

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aed06 serieAed08 serieAeq08 serie

Tabla de contenido