Bestop Trektop Manual De Instrucciones página 16

Install Tailgate Bar Retainers (Cont)
Section 8
Step 3
1
Open the Tailgate.
1 Place the Tailgate Bar Retainer (Part
#609.26 Right Side) and (Part # 609.27
Left Side) on the corner of the vehicle and
attach with two (2) M8 x 24mm bolts that
were removed when the Hard Top was
removed.
2
Attach the tab that is hanging down into
the tailgate opening with a M6 x 1.0 x 15
Screw (Part #533.61)
Repeat this step on the left side of the
vehicle.
P16 - 56872 Rev. I 0921
2
Installation Instructions - Trektop for Bronco 2 Door
Tools
T30
Torx Driver
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 2
T-30 Torx
Tailgate Bar Retainer Right
Part #609.26
Qty. 1
Page 16
Parts
Tailgate Bar Retainer Left
Part #609.27
Qty. 1
© 2021 Bestop, Inc.