Bestop Trektop Manual De Instrucciones página 18

Install Belt Retainers
Section 10
Attach the Belt Retainer Right (Part # 597.80)
to the vehicle body using two (2) M8 x 24 mm
Screws that were removed when the Hard Top
was removed and one (1) M6 x 15mm screw
(Part #533.61).
Repeat this step on the left side of the vehicle.
P18 - 56872 Rev. I 0921
Tools
T30
Torx Driver
Installation Instructions - Trektop for Bronco 2 Door
Parts
Belt Retainer Right Belt Retainer Left
Part #597.80 Part #597.81
Qty. 1 Qty. 1
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 2
T-30 Torx
Page 18
© 2021 Bestop, Inc.