IVIEW K Serie Manual Del Usuario página 46

Weekly
Click "Weekly" tab, and you will see a weekly time table indicating the week days (Mon ~ Sun) and hours
(0 ~ 24), similar to the figure below:
X axis: 0 ~ 24 hours. Each time interval within a square is 15 minutes.
Y axis: Monday ~ Sunday.
Operation: You can set the record schedule for 3 record types as needed in this time table:
st
1 timeline – Schedule l recording, indicated in yellow,
nd
2 timeline -- Alarm recording, indicated in magenta, and
rd
3 timeline -- Motion recording, indicated in cyan.
Click and hold the start time point, and drag to the end time point to set the record time range.
Custom
Click "Custom" tab, and you can set a more specific record time range for the 3 record types: Schedule,
Motion, and Alarm.
How to add a new time setting:
1. Check the record type you want to schedule the recording.
2. Set the start time (From) and end time (To).
3. Click "Add" to add the time range you just set into the schedule table. Before adding the time range,
you will be prompted to confirm as follow:
Check if the information shown is correct. Click "OK" if the information is correct. Click "Cancel" if the
information is wrong.
How to modify / delete a current time setting:
1. Select the schedule setting you want to modify from the schedule table. The setting will be displayed in the left
setting panel.
2. Modify the setting in the left setting panel, and click "Update".
All manuals and user guides at all-guides.com
~42~
REMOTE OPERATION