Cleaning And Storage - Duronic SADT2 Manual De Instrucciones

• Before you clean the appliance, always switch it off,
• unplug it and let it cool off.
• Do not touch the appliance with wet hands.
• Clean using a damp cloth,
to which you can apply a little detergent if necessary.
• Do not let water run into the appliance or spill water onto the appliance.
• Cleaning can be done once per month.
When this appliance is not being used,
it should be stored in a dry location out of reach of children.
Do not keep the appliance connected to a power source.
Follow the storage instructions provided in the section "Technical Specification".
Problem Possible Causes
On/ Off button switched off Switch on the on/off button
Device
does not
No Power
light up
No Power
LEDs have reached the
end of its service life
LEDs faulty

Cleaning and Storage

Disposal
Please note that this appliance is marked
with the WEEE symbol on the left.
This means that this appliance must not be
disposed of together with ordinary household waste,
as electrical and electronic waste
must be disposed of separately.
FAQ
11
Solutions
Connect the main plug correctly
The main cable is defective. Contact
customer services or your retailer
If you need to have the appliance
repaired, contact customer service or
an authorized dealer.