Before You Begin; Tools Required For Assembly - Duronic FFPS Manual De Instrucciones

• Check that you have all of the correct parts as described in the Box
Contents section below.
• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Assembly of this screen requires at least two people for some of the steps.
• Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
• Phillips screwdriver
• Spirit level
4x Hanging
screws and
raw plugs
2x Joint bar

Before You Begin

Tools Required for Assembly

Box Contents
4x Hanging 24x Joiner
bracket
• Allen key (included in the box)
• Drill (if installing onto a wall)
Material
screws tension pegs
(number varies
depending on
screen size)
6x metal rods
(various lengths)
6
4x L-joiner