Stanley IntelliSensor Pro Manual De Instrucciones página 6

109F Manual (B/E/F)
illuminate the keypad depth mode (1/2"
depth default).
IMPORTANT: The unit cannot be moved
before calibration is
READY
complate and
"READY" appears on
the LCD and LED
illuminates.
ILLUSTRATION 5
USAGE
Selecting Depth Detection
1. Depress and hold "ON" button once (1x)
to select to 1/2 " read depth detection.
The 1/2"mode LED will illuminate
(illustration 3). The unit will then
calibrate, followed by a beep and a
"READY" displayed on the LCD.
2. "Double-click" / Depress and hold ON
button twice (2x) to select to 1" read
depth detection. The 1" mode LED will
illuminate (illustration 3). The unit will
then calibrate , followed by a beep and
a "READY" diplayed on the LCD.
3. "Triple-click"/ Depress "ON" button
three times (3x) to select 1-1/2" read
depth detection. The 1-1/2" mode LED
will illuminate (illustration 3). The unit
will then calibrate, followed by a beep
and a "READY" displayed on the LCD.
IMPORTANT: Unit will automatically shut-
off if ON button is released following steps
1,2,3 above.
6 17/2/05, 3:38 PM