Stanley IntelliSensor Pro Manual De Instrucciones página 8

Detecting Live Wires
The live wire red LED lens (illustration 1) will
illuminate, warning when in the proximity
(typically within 4-18" distance) from a live
wire. The LCD screen will then display a live
wire icon (illustration 2) on the LCD defining
full detection. Maximum depth detection of
2".
Static electricity charges that can develop
on drywall and other surfaces will spread
the voltage detection area many inches to
each side of the actual electrical wire. To
aid in locating the wire position, scan
holding the unit 1/2 inch away from the wall
surface or place other hand on surface
approximately 12 inches from sensor.
Warning: shielded wires or live wires
in metal conduits, casings, metalized
walls or thick, dense walls, will not be
detected. Always turn AC power off
when working near wiring.
The IntelliSensor™ Pro is designed to detect
110 volts (for USA version) and 230 volts
for (European version) AC in live electrical
wires. It will also detect the presence of live
wires having greater than 230 volts.
8
109F Manual (B/E/F) 8 17/2/05, 3:38 PM