Corresponding Display Indications And Buttons; Entering The Function Menu; Function Menu Functions - Pioneer MEH-P5350 Manual Del Usuario

Corresponding Display Indications and Buttons

This product's display features Key Guidance Indicators. These light to indicate which of
the 5/∞/2/3, FUNCTION and AUDIO buttons you can use. When you're in the
Function Menu (refer to next section), Detailed Setting Menu (refer to page 13), Initial
Setting Menu (refer to page 34) or Audio Menu (refer to page 28), they also make it easy
to see which 5/∞/2/3 buttons you can use to switch functions ON/OFF, switch repeat
selections and perform other operations.
Indicator and corresponding buttons are shown below.
7 Head Unit
When 1 is lit in the display, perform appropriate operations with the z buttons.
When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed
Setting Menu or Initial Setting Menu. You can switch between each of these menus and
between different modes in the menus using button x on the head unit or remote con-
troller.
When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch
between modes in the Audio Menu using button c on the head unit or remote controller.

Entering the Function Menu

The Function Menu lets you operate simple functions for each source.
Note:
• After entering the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
1. Select the desired mode in the Function Menu. (Refer to next section,

"Function Menu Functions".)

Each press changes the Mode ...
All manuals and user guides at all-guides.com
7 Remote Controller 7 Display
Continued overleaf.
10