Porter Cable PCCR701 Manual Del Usuario página 10

English
4. Rotate the ON/OFF-Volume dial
seek buttons 8 to set minutes.
5. If you do not press a button within 5 seconds, the clock
programming feature will automatically return to the
previous mode. The clock is set once the clock button is
re-pressed or if the numbers stop flashing.
To Program The Presets
6 FM and 6 AM radio stations may be independently set.
After programming the buttons, pressing the "1-6" preset
toggle button will instantly change the frequency to the
4
preset station.
To program the channels:
1. Turn power ON.
2. Press the mode button 2
selected (AM or FM).
3. Tune the radio to the desired station (read Tune or
Seek Function).
4. Press the set preset button
in the LCD .
5
5. Press the "1-6" preset toggle button
the 6 presets.
6. Once it displays the desired preset number, press the set
preset button.
7. Repeat steps 3 through 6 to set the other
memory buttons.
Equalizer Button
To Set the Bass and Treble:
1. Press the equalizer button
will appear on the LCD 5 .
2. Rotate the ON/OFF - Volume dial
bass level.
3. Press the equalizer button a second time to get to the
treble equalizer.
4. Rotate the ON/OFF - Volume dial
treble level.
5. Press the equalizer button a third time to exit.
nOTE: If you do not press a button within 5 seconds, the
equalizer programming feature will automatically be set to
the new setting.
Important Radio Notes
1. Reception will vary depending on location and strength
of radio signal.
2. Certain generators may cause background noise.
3. AM reception will most likely be clearer when powered
by a battery pack.
Auxiliary Port
nOTE: For proper performance, ensure that the auxiliary
cord ends are firmly inserted into the auxiliary port and your
device.
To use the auxiliary port 15 , plug the output jack from
a phone, CD or MP3 player into the auxiliary port. (cord
sold seperately) The sound from the external source plays
8
All manuals and user guides at all-guides.com
1 left or right to tune /
until the desired mode is
3 . The "Mem" icon will flash
4 to scroll through
6 once. The bass equalizer
1 to set the desired
1 to set the desired
through the speakers. The radio will not automatically
switch to AUX Mode when an input source is detected. The
mode button needs to be set to the "AU" function.
2
Maintenance
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a PORTER-CABLE
factory service center or a PORTER-CABLE authorized
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.portercable.com/register.
THREE YEAR LIMITED WARRANTY
PORTER-CABlE will repair or replace, without charge, any
defects due to faulty materials or workmanship for three
years from the date of purchase for tools (two years for
batteries). This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.
portercable.com or call (888) 848-5175. This warranty does
not apply to accessories or damage caused where repairs
have been made or attempted by others. This warranty
gives you specific legal rights aand you may have other
rights which vary from state to state or province to province.