Assembly Parts List; Accessory Bag; Assembly Steps - EGOFIT WALKER PRO Instrucciones De Uso

ASSEMBLY PARTS LIST

No. Part name
1 Egofit Walker Pro/Egofit Walker Plus Walking Treadmill
2 Display Screen
3 Running Belt
4 Maneuverable Wheels
5
6 Power Cord 1.8m
7 Safety Key
8 Remote Controller Holder
9 Handrails Switch Knob
7
8
1
2
5

ACCESSORY BAG

1
RF Remote Controller X 1
Allen Wrench 5mm X 1
Lubricant Oil X 2
Power Cord 1.8m X 1
4
User Manual X 1
Safety Key (if Egofit Walker
Plus) X 1
Switch
6
3
9
4
2 3
5 6
Qty.
Egofit Walker Pro comes with full assembled.
1
To avoid damage to the treadmill, place the treadmill in a location out of direct sunlight. Make
1
sure that there is at least 6 feet of open space around the treadmill.
1
Egofit Walker Plus comes with the handrails lying down and position fixed.
To raise up the handrails,
2
1. Spin the knob counterclockwise until the lock is unclasped, loosen the knob for both sides;
1
2. Raise up the handrails;
1
3. Stop at the position of lock, spin the knob clockwise until the lock is clasped, tighten the knob
for both sides.
1
The speed limit is different for 2 statuses of the handrails:
1
When Handrails lie down, the max speed is 5km/h(3.1mph).
When Handrails stand up, the max speed is 6km/h(3.73mph).
2
23

ASSEMBLY STEPS

Spin the knob Spin the knob Spin the knob
counterclockwise to
counterclockwise to clockwise to
loosen loosen tighten
Spin the knob
clockwise to tighten
to clasp
to unclasp
24