Connecting 19-Inch Modules In Parallel; Converting The Holder System - Festo EduTrainer Universal Manual Del Usuario

All manuals and user guides at all-guides.com

2.3 Connecting 19-inch modules in parallel

1. Remove as many blanking plates as necessary.
2. Remove the 19-inch module to which you want to connect a new 19-inch module in parallel (e.g. the
SysLink system connector module).
3. Connect the extension module with the SysLink module. The specific push-in connector can be found in
the description for the respective 19-inch modules in this manual.

2.4 Converting the holder system

The holder system can be easily converted from a rack variant to an A4 variant and vice versa.
Rack variant:
© Festo Didactic GmbH & Co. KG 739319
A4 variant:
2 Assembly instructions
47